Quick Packaging FAQ Searches

Packaging Frequently Asked Questions

Search and find frequently asked questions concerning packaging related topics.

Also filter FAQs by category in Quick Search Section.

   Search   Reset Search  
Enter Search Value:
- without any prefix or suffix to find all records where a column contains the value you enter, e.g. Net
- with | prefix to find all records where a column starts with the value you enter, e.g. |Network
- with | suffix to find all records where a column ends with the value you enter, e.g. Network|
- with | prefix and suffix to find all records containing the value you enter exactly, e.g. |Network|

Select a frequently asked question to display the answer below.
detail

Do I need a special workstation for packaging ESD material?

Yes. All handling and packaging of ESDS items shall be performed at a protective workstation. If this is not possible, the ESD protective field service kit MUST be used.

Category: ESD Workstation

detail

What does a ESD protective workstation consist of?

There are different types of ESD protective workstations. The following are some of the available ESD protective workstations:

  • 4240-01-087-3458: Static Control Work Station
  • Components (contains 4 ft. x 6 ft. foot floor mat with 15-foot ground, cord, table mat, wrist strap, and 5-foot bonding cord).4940-01-250-4236: Work Station, Electrostatic
  • Control (contains a static dissipative soft table mat, common point ground system, and wrist strap with current limiting resistor; to be used in all areas other than clean rooms or laminar flow booths where ESDS items are handled; includes a small/medium and a large/extra large wrist strap cuff).4940-01-250-4237: Work Station Kit, Electrostatic
  • Control (contains a static dissipative portable work surface, common point ground system, and wrist strap with current limiting resistor;for situations where other static control used in workstations are not available; includes a small/medium and a large/extra large wrist strap cuff).
  • 4940-01-250-4238: Work Station Kit, Electrostatic Control (permanent technical workbench or table with static dissipative work surface; may be used in any area where ESDS items are handled. This is a specification for work surface only. Wrist straps and a common point grounding system must be added).
  • If your ESD workstation does not include a wrist strap - you need to order: 4240-01-063-4880 (wrist strap 36 inches in length with 250K resistor)

Category: ESD Workstation

detail

What does a ESD field service kit consist of?

An ESD protective field service kit (5920-01-253-5368) consists of the following:

  • 3 each - pouch, MIL-DTL-81997, Type II;
  • 3 each - barrier bag, MIL-PRF-81705, Type I;
  • 2 each - wrist strap;
  • 1 each - ground cord; and
  • 1 each - mat, static dissipating.

Category: ESD Workstation