Redirecting...
Archive
Search

DLA News Archive

Results:
Category: Logistics In Action

An Airman from the 42nd Operational Support Squadron directs U.S. Navy MH-60R Sea Hawk helicopters as they arrive at Maxwell Air Force Base, Alabama, from Naval Air Station Jacksonville and Naval Station Mayport, Florida, Sept. 1, 2019. The helicopters evacuated from the Jacksonville area in advance of Hurricane Dorian. In addition to the helicopters, Maxwell AFB is serving as an Incident Support Base for Federal Emergency Management Agency and Defense Logistics Agency personnel and equipment. (U.S. Air Force photo by Billy Birchfield)

Sept. 3, 2019

Maxwell AFB opens for Hurricane Dorian support

MAXWELL AIR FORCE BASE, Ala. (AFNS) — Logistics In Action: Article originally appeared on the Air Force website — Personnel from the Federal Emergency Management Agency and the Defense Logistics Agency arrived Aug. 29 to begin preparations for receiving trailers of food, water and other necessary supplies FEMA may use after the hurricane passes.

Puerto Rico National Guard members check and fuel military vehicles and electrical generators and replenish water distribution trucks on Aug. 27, 2019, in preparation to respond to Hurricane Dorian.

Aug. 28, 2019

Puerto Rico governor activates Guard as Dorian approaches

SAN JUAN, Puerto Rico — Logistics In Action: Article originally appeared on the National Guard website — The Puerto Rico National Guard was activated Wednesday by Gov. Wanda Vazquez to support emergency response to Hurricane Dorian, which had winds of 75 mph as of the afternoon.

Members of the 1st Theater Sustainment Command's Syrian Logistics Cell stand for a group photo in Erbil, Iraq.

Aug. 26, 2019

This Is What We Do: Syrian Logistics Cell

ERBIL, IRAQ — Logistics In Action: Article originally appeared on the 1st Theater Sustainment Command website —Tucked away in northern Iraq is a small group of Mississippi Army National Guard Soldiers dedicated to coordinating and fulfilling the essential logistics needed for warfighters.

Marines, engineers conduct a first-of-its-kind 3D printing exercise

Aug. 26, 2019

Marines, engineers conduct a first-of-its-kind 3D printing exercise

CHAMPAIGN, Ill. — Logistics In Action: Article originally appeared on the Marine Corps Systems Command website — Marines from Marine Corps Systems Command and 7th Engineer Support Battalion along with engineers from the U.S. Army Corps of Engineers Construction Engineering Research Laboratory conducted the first known 3D concrete printing operation with a three-inch print nozzle at the CERL headquarters in early August in Champaign, Illinois.

Airmen with the 75th Logistics Readiness Squadron unload cargo from a C-17 Globemaster III at Hill Air Force Base, Utah, Aug. 9, 2019. The C-17 is attached to the Reserve 89th Airlift Squadron assigned to the 445th Aircraft Wing out of Wright-Patterson AFB, Ohio. (U.S. Air Force photo by Cynthia Griggs)

Aug. 22, 2019

2019 a busy year for Hill’s 75th Logistics Readiness Squadron

HILL AIR FORCE BASE, Utah — Logistics In Action: Article originally appeared on the Hill Air Force Base website — The year is just halfway over and, according to Mark Dylla, the operations manager for the 75th Logistics Readiness Squadron at Hill Air Force Base, the squadron has had its busiest year since 9/11.

A U.S. Air Force C-130H Hercules assigned to the 746th Expeditionary Airlift Squadron receives fuel Nov. 6, 2018, at an undisclosed location. U.S. and Coalition aircraft provide unmatched combat capability in support of U.S. Central Command military objectives. (U.S. Air Force photo/Staff Sgt. Clayton Cupit)

Aug. 21, 2019

AMC C-130 rainbow fitting inspections complete

SCOTT AIR FORCE BASE, Illinois — Logistics In Action: Article originally appeared on the Air Mobility Command website — In less than two weeks, all 113 Total Force C-130 Hercules aircraft have been inspected and 112 cleared to return to worldwide operational duty, following a temporary removal from service Aug. 7 designed to address atypical cracks found on an aircraft.

Airmen with the 386th Expeditionary Logistics Readiness Squadron expeditionary theater distribution center showcase some of the items stocked in the facility at Ali Al Salem Air Base, Kuwait, Aug. 13, 2019. The theater distribution center packs a variety of items to include body armor, advanced combat helmets, ballistics plates and other chemical warfare defense items. (U.S. Air Force photo by Staff Sgt. Mozer O. Da Cunha)

Aug. 20, 2019

ETDC supplying Airmen with right gear for mission

ALI AL SALEM AIR BASE, Kuwait (AFNS) — Logistics In Action: Article originally appeared on the Air Force website — Ali Al Salem’s ETDC, currently the second largest distribution center in the (USCENTCOM) theater of operations, is the distribution center support hub for more than 14,000 warfighters, issuing up to 100,000 items worth $56 million every six months.

U.S. Air Force Airman 1st Class Christopher Flores-Rivera, 48th Logistics Readiness Squadron fuels distribution operator apprentice, monitors a fuel line on the flightline at Royal Air Force Lakenheath, England, Aug. 13, 2019. The Fuels Management Flight acquires, manages, distributes and maintains the fuel necessary to ensure aircraft from assigned to the 48th Fighter Wing are ready to fly. (U.S. Air Force photo by Airman 1st Class Shanice Williams-Jones)

Aug. 19, 2019

48th LRS F-Flight: Fueling the Liberty Wing

ROYAL AIR FORCE LAKENHEATH, England — Logistics In Action: Article originally appeared on the Royal Air Force Lakenheath website — U.S. Air Force’s combat aircraft deliver high performance tactical support but they require fuel to get off the ground. The 48th Logistics Readiness Squadron Fuels Management Flight ensures the Liberty Wing’s fighter squadrons are gassed and ready to go.

Travis AFB is the first field-unit location in the Air Force to have the Stratays F900 3-D industrial printer certified by the Federal Aviation Administration and Air Force Advanced Technology and Training Center for use on aircraft replacement parts. (U.S. Air Force photo by Louis Briscese)

Aug. 19, 2019

Travis AFB produces first certified 3-D printed aircraft parts

TRAVIS AIR FORCE BASE, Calif. (AFNS) — Logistics In Action: Article originally appeared on the Air Force website — The Stratasys F900 3D printer, which is capable of printing plastic parts up to 36-by-24-by-36 inches, uses a material called Ultem 9085 that is more flexible, dense and stronger than typical plastic.

Construction of a new 3.55 MW solar array was completed June 2019 at Hill Air Force Base, Utah. The array feeds directly into the electric grid adding to the base's existing renewable energy prodcution capability and was one of several projects that contributed to the base's energy office earning the 2019 Federal Energy and Water Management Award from the U.S. Department of Energy. (U.S. Air Force photo by Todd Cromar)

Aug. 16, 2019

Hill Air Force Base wins DOE award for energy efficiency

HILL AIR FORCE BASE, Utah — Logistics In Action: Article originally appeared on the Hill Air Force Base website — The Energy Office at Hill Air Force Base earned high honors recently when the installation was awarded the 2019 Federal Energy and Water Management Award from the U.S. Department of Energy.